Bolondi MW586A 7250 PSI Tank Cleaning Machine Water Powered Self Spinning | |
Material: | aisi 316 + bronze |
Flow: | 15 - 60 l/min 4 - 16 us gpm |
Pressure: | 5 - 500 bar 70 - 7,250 psi |
Temperature: | 90°C. - 194°F. |
Spinning speed: | Slow 6 - 16 RPM |
Filter: | 700 micron |
Application: | cleaning sector 360° |
Nozzles: | 2 - 4 x 1/4" NPT |
Min pass-through hole: | 140 mm / 5.512 in. |
Complete cycle time: | 4.8 Min. |
Weight: | 9.5 KG - 22 lbs |
Volumetric Rotating Head for Ultra-High-Pressure
Heavy-Duty Cleaning
The MW586A Volumetric Rotating Head is designed to handle ultra-high-pressure cleaning in demanding industrial applications.
It is the ideal solution when residues are particularly stubborn and difficult to remove-such as water-based paints or highly adhesive products-and when High-impact cleaning must be concentrated within limited spaces.
The MW586A is successfully used for cleaning IBC containers, tanks, tanker trucks, and silos, especially in the chemical, coatings, and mining industries, where operating conditions are severe and cleaning effectiveness is a critical requirement.
Why choose the MW586A
The real strength of the MW586A lies in the combination of ultra-high pressure up to 7,250 PSI and low flow rate, allowing extremely targeted action on Equipment internals. The low rotation speed enables the jet to remain longer on each surface area, significantly improving cleaning effectiveness even against the most stubborn residues.
The MW586A is designed for users who:
- need to remove difficult and strongly adhering deposits
- require ultra-high-pressure cleaning for demanding applications
- are looking for a compact yet extremely high-performance cleaning head
Advantages for the operator
- Operating pressures up to 7,250 PSI for extreme cleaning applications
- Compact dimensions combined with high performance
- Deep and targeted cleaning thanks to low rotation speed
- Ideal for severe residues such as water-based paints
High reliability even in Heavy-duty applications
Main technical features
- Reduced flow rate: 15.85 GPM
- Operating pressure up to 7,250 PSI
- Configuration with 2 or 4 nozzles
- Low rotation speed for precise and effective cleaning
Installation and certifications
The MW586A can be easily integrated into existing cleaning systems and does not require special installation solutions. It is engineered for long-term reliability and requires only standard maintenance on wear components.
Available on request:
- CE certification
- ATEX certification
If you need a Volumetric Rotating Head capable of delivering High-impact cleaning even on difficult residues, the MW586A is a high-performance technical solution.
The Bolondi team is available to help you select the most suitable configuration or develop customized solutions tailored to your specific application requirements.